جستجو در تالارهای گفتگو

EVALUATION OF DIRECT-DISPLACEMENT BASED SEISMIC DESIGN METHOD FOR EBFs Amin MOHEBKHAH Assistant Professor of Structural Eng., Dept. of Civil Eng., Malayer University, Malayer, Iran amoheb@malayeru.ac.ir Sina FARAHANI M.Sc. Student of Structural Engineering, Dept. of Civil Eng., Malayer University, Malayer, Iran sina_farahani459@yahoo.com, sina.farahani@stu.malayeru.ac.ir Keywords: Direct displacement-based design, Steel eccentrically braced frame, Seismic behavior, Nonlinear dynamic analysis, Performance level Recent research in the field of earthquake engineering has seen the development of number of different displacementbased seismic design (DBD) methods. Such methods aim to overcome limitations with the force-based design methods incorporated in current codes. The most developed DBD method currently available is the Direct DBD approach, described and investigated in a text by Priestley et al. (2007). While the guidelines in the DDBD code have been relatively well tasted for RC structures, further verification and development is required for steel frame systems. There is just one comprehensive study can be found on DDBD of eccentrically braced frames (EBFs) which has been published recently by Sullivan (2013). The study presented by Sullivan (2013), has been focused of DDBD of EBFs with short (shear) link beams. Therefore, the aim of present study is to evaluate the ability of DDBD method for designing EBFs with intermediate and long link beams. To this end, three five-storey EBFs with short, intermediate and long link beams designed using the DDBD method proposed by Sullivan (2013). Figure 1 shows the case study EBF structures selected for examination in this paper. دانلود منبع 00390-SD.pdf

Seismic Performance of Torsionally Stiff and Flexible Single Story Buildings Designed Based on Iranian Seismic Code(Standard 2800) Seiyed Ali Haj Seiyed Taghia; A.S. Moghadam This paper examines differences in performances of a range of torsionally stiff and flexible single story buildings designed with the provisions of Iranian Standard 2800. Seismic nonlinear dynamic time history behavior of eight building models subjected to seven horizontal bi-directional design spectra compatible ground motions are investigated. These models cover a wide range of very torsionally stiff to very flexible buildings. Response parameters are element ductility demand and building story drift ratio. These criteria are appropriate indices for structural and nonstructural damages, respectively. This investigation shows that the linear static analysis of building code such as Iranian Standard 2800 is not generally adequate for structures with very low torsional stiffness. منبع دانلود JSEG271354307400.pdf