جستجو در تالارهای گفتگو

Seismic behaviors of steel plate shear wall structures with construction details and materials Wang Meng a,⁎, YangWeiguo a, Shi Yongjiub, Xu Jian c a School of Civil Engineering, Beijing Jiaotong University, Beijing 100044, China b Department of Civil Engineering, Tsinghua University, Beijing 100084, China c China Southwest Architectural Design and Research Institute Corp. Ltd, Chengdu 610081, China a r t i c l e i n f o a b s t r a c t Article history: Received 3 May 2014 Accepted 8 January 2015 Available online 23 February 2015 Keywords: Steel plate shear wall structure Structural construction detail Low yield point steel T type stiffened ribs Finite element method (FEM) Hysteretic behavior In order to have a systematic and comprehensive comparison of seismic behaviors of steel plate shear wall structures with different construction details, a numerical method was proposed, which was proved accurately to predict the performance of structures with published quasi-static tests. Then, eight typical steel shear wall models with different structural construction details were established. Also an advanced stiffened low yield point steel plate shear wall was proposed to avoid excessive out-of-plane deformation. The seismic behaviors of above nine shear wall models were fully compared and analyzed, and key issues, such as energy-dissipating capacity, ductility, out-of-plane deformation and the effect of tension field on the columns were discussed in depth. The results showed that: in high-intensity seismic area, load-carrying capacity, hysteretic behaviors, failure modes, seismic ductility and economic performance should be taken into account comprehensively to choose the appropriate form of steel plate shear wall structure; the proposed low yield point steel plate shear wall with T type stiffened ribs could most effectively improve the energy dissipation capacity and ductility, and lessen the impact of tension field on the columns, besides, it had better load-carrying capacity and smallest out-of-plane deformation. This method provided a good way for improving the seismic behaviors of steel shear wall structures. 1-s2.0-S0143974X15000097-main.pdf