جستجو در تالارهای گفتگو
در حال نمایش نتایج برای برچسب های 'staggered openings'.
1 نتیجه پیدا شد
Failure analysis of RC shear walls with staggered openings under seismic loads تحلیل گسیختگی دیوارهای برشی بتن مسلح با بازشوهای شطرنجی در بارهای لرزه ای Marius Mosoarca a b s t r a c t Reinforced concrete shear walls are used to design buildings located in seismic areas, because of their rigidity, bearing capacity and high ductility. Until now many theoretical and experimental tests on shear walls with or without openings have been made, therefore their failure modes have been analysed and are rather very well-known; the research results being confirmed by real failure modes of RC walls after earthquakes. Design codes and standards based on the knowledge of the failure modes of the reinforced concrete walls were developed in order to obtain the ductile failure mechanisms. A special case is the failure mode of the reinforced concrete shear walls with vertical staggered openings. If at coupled walls the elements must be designed so that the plastic hinges appear at the ends of the coupled beams and then in the pier, this thing is more difficult at shear walls with staggered openings. Theoretical and experimental studies on structural walls with staggered openings, lamellar walls and walls with bulbs at the end have been made recently. There have also been studied the followings: the degradation of the stiffness, the ductility function to the intensity of the seismic force, the presence of the vertical forces, the position and the size of the openings and the reinforcing ways. The article presents the results of the theoretical and experimental tests on failure modes of three types of reinforced concrete shear walls with staggered openings which are compared to those obtained from walls with vertical ordered openings as far as the seismic response is concerned. The failure modes of the structural walls under seismic stress have been identified using calculus programs and cyclic alternated experimental tests. The theoretical research on the failure modes was the basis for the elaboration of a simplified methodology for the calculus of the maximum theoretical seismic force that produces the concrete crushing in the ultimate limit stage. The results theoretically obtained with the help of the calculus programs have been confirmed experimentally. The analysis of the failure modes, obtained with the computing methodology proposed, contributed to the completion of the seismic design codes for shear walls with staggered openings. منبع عملکرد_دیوارهای_برشی_بتنی_با_بازشوهای.pdf